Water Cooler | D25C Water Works | White
Factory Super Special - 3 Year Warranty
FREE Filter Kit Value $189.00
FREE Australia Wide Shipping Value $115.00
Total Free Bonus Value $304.00
Special Ends - 30 April 2024
Call us with any questions on 1300 55 32 82 or 0414 602800
The D25 Series is the latest addition to our range of Point-of-Use (POU) water coolers. Its elegant satin finish makes it an excellent addition to any home or office.
COLD TANK: The D25 Series features a large 11-litre high-density polypropylene tank that is tough, rustproof, and easy to clean with its large radius.
CABINET: The satin black or white cabinet features top and front panels made from moulded UV-treated ABS, and zinc-coated steel side panels.
TAPS: The D25 Series features NSF-approved, hygienic, and durable polypropylene push taps with a self-closing design and fast flow. The hot safety tap comes as standard on hot/cold models.
FLOAT ASSEMBLY: The dual float system maintains the water level and shuts off the water when the tank is full.
OPTIONAL EXTRAS: PNP FILTER SYSTEM: The Waterworks™ PNP filter range is available in single, twin, or triple units. With the swing & twist design and automatic water shutoff, filter changes are simple and do not require tools or turning off the mains water.
CD WHITE OR BLACK: Our cup dispensers come in black or white to match either color unit. Waterworks™ paper and plastic cups are designed to fit our dispensers.
INSTALLATION: The D25 Series must be installed in accordance with local plumbing laws. Failure to install a certified pressure limiting valve will void the warranty.
SPECIFICATIONS: REFRIGERATION: The refrigeration system uses gas R134A, and the refrigerant flow is controlled by a capillary tube that has no moving parts. The compressor is hermetically sealed with an automatic overload protector, and no lubricant is needed.
ELECTRICAL: The D25 Series is certified with number 160793 and runs on 220V 50Hz single phase power. A 1.5-meter power cord is supplied, and the full load current is 1.2 amps.
CONDENSER: The D25 Series features a quietly operating, air-cooled condenser with no moving parts.
PERFORMANCE: Tap 1: Approx. 4-10°C Tap 2: Room Temperature Hot tap: Approx. 84-89°C
CAPACITY: ROOM TEMP °C 21 27 32 150ML CUPS/HR 10°C 35 28 16 LITRES/HR AT 10°C 5.2 4.2 2.4 HOT WATER DELIVERY: 15 x 170ml cups per hour (*Intermittent use only, continuous use will result in reduced performance.)
SHIPPING WEIGHTS & DIMENSIONS: MODEL WEIGHT MODEL WEIGHT WIDTH DEPTH HEIGHT D25C: 21kg D25CH: 23kg 33cm 39cm 115cm
WARRANTY: The Waterworks™ D25 Series comes with a 36-month comprehensive warranty (copy available on request). The warranty provides comprehensive parts and labour coverage for 36 months from the date of original sale
REFRIGERATION SYSTEM:
Ozone friendly HFC-134a refrigerant. Flow is controlled by capillary tube which has no moving parts. Condenser is air cooled static type for silent running. No fan assembly is required. Compressor is hermetically sealed, permanently lubricated and protected against motor overload.
ELECTRICAL:
240 Volts 50Hz single phase. A 1.5 metre house cable and 3 pin plug is supplied. Full load current is 1.5 amps.
POWER CONSUMPTION:
D5C : 0.25kwh/day & 7.5kwh/month D5CH : 1.6kwh/day 48 kwh/month
Download Installation Instructions Here
DIMENSIONS:
SD5C: 15kgs SD5CH: 17kg
D5C/D5CH: 310mmW x 310mmD x 1040mmH SD5C/SD5CH: 310mmW x 310mmD x 630mmH
CABINET:
Top and front panels are moulded of UV treated ABS and side panels are zinc coated steel sheets covered in electrostatically applied high polymer polyester resin.
COLOUR:
High gloss cloud white available as standard.
DRIP TRAY:
Concealed lift-out design of a high impact durable plastic. Removable for sanitation, it incorporates an anti-splash grid which diverts drain water into the drip tray.
TAPS:
High impact polypropylene lever type. Fast flow and easy to operate. They’re assembled directly onto the reservoir and are fully recessed for added protection. Taps are 177mm above the drain grid allowing ample room for filling kettles and other tall objects. Hot tap has safety influence.
TOP:
One piece heat resistant plastic. This rust-proof top provides a flat surface to hold small coffee servers and trays.
FUNCTION STATUS DISPLAY:
Waterworks unique design. This exclusive device illuminates a red green signal indicating the Power/Hot/Cold position of the dispenser.
COOLING RESERVIOR:
Constructed of polypropylene plastic, approximately 12 litres in capacity. The reservoir features large radius corners to facilitate cleaning. The integrated zoned waterway and baffle system prevents ice rings from restricting chilled water flow. Cold water capacity below the baffle is 4.2 litres. Water above the baffle stays at or about room temperature.
AIR FILTER:
Located on the float assembly for easy access. The air filter contains a replaceable filter disc with a one micron membrane media.
FLOAT ASSEMBLY:
One stage polyethylene float valve system incorporates a primary float valve which maintains the water level in the reservoir and shuts off when full. The system is designed to operate on an incoming water pressure range of 140-700kPa and a pressure limiting valve should be fitted in situations where the mains pressure may fluctuate to greater than 700kpa.
REFRIGER ATION SYSTEM:
Ozone friendly HFC-134a refrigerant. Flow is controlled by capillary tube which has no moving parts. Condenser is air cooled static type for silent running. No fan assembly is required. Compressor is hermetically sealed, permanently lubricated and protected against motor overload.
ELECTRICAL:
240 Volts 50Hz single phase. A 1.5 metre house cable and 3 pin plug is supplied. Full load current is 1.5 amps.
POWER CONSUMPTION:
D5C : 0.25kwh/day & 7.5kwh/month D5CH : 1.6kwh/day 48 kwh/month
PERFORMANCE:
Tap 1 Outlet water 9DC approx Tap 2 Outlet water 18DC approx Hot Tap Outlet water 88DC approx
SHIPPING WEIGHT:
D5C: 20kg D5CH: 22kg
DIMENSIONS:
SD5C: 15kgs SD5CH: 17kg
D5C/D5CH: 310mmW x 310mmD x 1040mmH SD5C/SD5CH: 310mmW x 310mmD x 630mmH
WARRANTY:
The entire range of Waterworks D5 Series water coolers
are covered by a 36 Month Comprehensive Warranty (copy available on request). The warranty provides comprehensive parts and labour coverage, for the period of 12 months from the date of the original sale.
