Water Works | Plumbed In Water Cooler | Filter Included | 3 Year Warranty
Factory Super Special - 3 Year Warranty
FREE Filter Kit Value $189.00
FREE Shipping Value $115.00
Total Free Bonus Value $304.00
Special Ends - 30 November 2024
Call us with any questions on 1300 55 32 82 or 0414 602800
Introducing our latest addition to the range of Point-of-Use (POU) water coolers, the D25 Series. Its sleek satin finish adds an elegant touch to any home or office.
Equipped with an 11-litre high-density polypropylene tank, the D25 Series ensures durability, rust-resistance, and ease of cleaning due to its large radius.
The cabinet of the D25 Series comes in a sleek satin black or white finish, featuring top and front panels made of moulded UV-treated ABS and zinc-coated steel side panels.
For easy and hygienic dispensing, the D25 Series features NSF-approved polypropylene push taps that are self-closing and fast-flowing, with a hot safety tap available in hot/cold models.
To maintain water levels and prevent overflow, the D25 Series is equipped with a dual float system.
Optional extras include the Waterworks™ PNP filter system available in single, twin, or triple units, and black or white cup dispensers that match either color unit.
Installation of the D25 Series must comply with local plumbing laws, and failure to install a certified pressure limiting valve will void the warranty.
The refrigeration system of the D25 Series uses gas R134A and features a hermetically sealed compressor with an automatic overload protector and no need for lubricant. Electrical certification with number 160793 is 220V 50Hz single phase power, and a 1.5-meter power cord is included.
Performance specifications of the D25 Series include approximate temperatures of 4-10°C for Tap 1, room temperature for Tap 2, and 84-89°C for the hot tap. The D25 Series can deliver 35, 28, and 16 litres per hour at 10°C for room temperatures of 21, 27, and 32°C respectively, and 15 x 170ml cups per hour for intermittent use of hot water.
The D25 Series has a shipping weight of 21kg for D25C and 23kg for D25CH, with dimensions of 33cm width, 39cm depth, and 115cm height.
Finally, the Waterworks™ D25 Series comes with a 36-month comprehensive warranty that covers parts and labour from the date of original sale (copy available upon request).
REFRIGERATION SYSTEM:
Ozone friendly HFC-134a refrigerant. Flow is controlled by capillary tube which has no moving parts. Condenser is air cooled static type for silent running. No fan assembly is required. Compressor is hermetically sealed, permanently lubricated and protected against motor overload.
ELECTRICAL:
240 Volts 50Hz single phase. A 1.5 metre house cable and 3 pin plug is supplied. Full load current is 1.5 amps.
POWER CONSUMPTION:
D5C : 0.25kwh/day & 7.5kwh/month D5CH : 1.6kwh/day 48 kwh/month
Download Installation Instructions Here
DIMENSIONS:
SD5C: 15kgs SD5CH: 17kg
D5C/D5CH: 310mmW x 310mmD x 1040mmH SD5C/SD5CH: 310mmW x 310mmD x 630mmH
CABINET:
Top and front panels are moulded of UV treated ABS and side panels are zinc coated steel sheets covered in electrostatically applied high polymer polyester resin.
COLOUR:
High gloss cloud white available as standard.
DRIP TRAY:
Concealed lift-out design of a high impact durable plastic. Removable for sanitation, it incorporates an anti-splash grid which diverts drain water into the drip tray.
TAPS:
High impact polypropylene lever type. Fast flow and easy to operate. They’re assembled directly onto the reservoir and are fully recessed for added protection. Taps are 177mm above the drain grid allowing ample room for filling kettles and other tall objects. Hot tap has safety influence.
TOP:
One piece heat resistant plastic. This rust-proof top provides a flat surface to hold small coffee servers and trays.
FUNCTION STATUS DISPLAY:
Waterworks unique design. This exclusive device illuminates a red green signal indicating the Power/Hot/Cold position of the dispenser.
COOLING RESERVIOR:
Constructed of polypropylene plastic, approximately 12 litres in capacity. The reservoir features large radius corners to facilitate cleaning. The integrated zoned waterway and baffle system prevents ice rings from restricting chilled water flow. Cold water capacity below the baffle is 4.2 litres. Water above the baffle stays at or about room temperature.
AIR FILTER:
Located on the float assembly for easy access. The air filter contains a replaceable filter disc with a one micron membrane media.
FLOAT ASSEMBLY:
One stage polyethylene float valve system incorporates a primary float valve which maintains the water level in the reservoir and shuts off when full. The system is designed to operate on an incoming water pressure range of 140-700kPa and a pressure limiting valve should be fitted in situations where the mains pressure may fluctuate to greater than 700kpa.
REFRIGER ATION SYSTEM:
Ozone friendly HFC-134a refrigerant. Flow is controlled by capillary tube which has no moving parts. Condenser is air cooled static type for silent running. No fan assembly is required. Compressor is hermetically sealed, permanently lubricated and protected against motor overload.
ELECTRICAL:
240 Volts 50Hz single phase. A 1.5 metre house cable and 3 pin plug is supplied. Full load current is 1.5 amps.
POWER CONSUMPTION:
D5C : 0.25kwh/day & 7.5kwh/month D5CH : 1.6kwh/day 48 kwh/month
PERFORMANCE:
Tap 1 Outlet water 9DC approx Tap 2 Outlet water 18DC approx Hot Tap Outlet water 88DC approx
SHIPPING WEIGHT:
D5C: 20kg D5CH: 22kg
DIMENSIONS:
SD5C: 15kgs SD5CH: 17kg
D5C/D5CH: 310mmW x 310mmD x 1040mmH SD5C/SD5CH: 310mmW x 310mmD x 630mmH
WARRANTY:
The entire range of Waterworks D5 Series water coolers
are covered by a 12 Month Comprehensive Warranty (copy available on request). The warranty provides comprehensive parts and labour coverage, for the period of 12 months from the date of original sale.
